JetNet 5010G

IP Surveillance 7+3G Managed Gigabit Ethernet Switch

2007 Control Engineering Product of the Year
  • 3 Gigabit Ethernet ports plus 7 fast Ethernet ports
  • Up to 3 Gigabit aggregated uplink bandwidth for hundreds of megapixel video streams
  • SFP flexible distance installation, 2~120km
  • QoS video precedence transmission
  • Optimized IGMP Query, snooping for one-to-many video transmission
  • VLAN traffic isolation
  • MSR redundant surveillance network, failure recovery time < 5ms
  • Advanced network management features support SNMP, RMON
  • Attached IP camera loss alarm through digital output, e-mail, and SNMP trap
  • Redundant power inputs DC12-48V (-48 optional)
  • IP31 rugged aluminum case
  • Wide operating temperature -40~70 model available (JetNet 5010G-w)

Top | Overview | Specification | Ordering Information | Quick Inquiry

Overview

The JetNet 5010G, a Managed Gigabit Ethernet Switch with seven fast Ethernet ports and three gigabit RJ45/SFP combo ports, is specifically designed to meet the requirements of reliable and quality video transmission systems for large scale IP surveillance projects or for large amount of megapixel IP cameras. The key features that JetNet 5010G optimizes for IP surveillance are:

  1. MSR (Multiple Super Ring): Guarantee of Reliable Video Transmission
    Network reliability is critical for video transmission, especially in a large IP surveillance system. While one single Ethernet link carries a number of video streams, any link failure can result in serious damages. Korenix MSR redundant ring technology guarantees a reliable video delivery; any network failure can be recovered within 5ms before causing damage to the video streamings.
  2. Optimized IGMP Query and Snooping: Quality and Cost-Effective Video Multicasting
    JetNet 5010G features IGMP Query which can only be seen on more expensive layer 3 routers. JetNet 5010G further optimizes IGMP query and snooping implementation for quality video multicasting. These advanced features not only manage the multicast videos efficiently, but also eliminate the need of deploying a legacy costly layer 3 router.
  3. Bandwidth Aggregation: Extensive Network Capacity for Big Projects or Megapixel Images
    Megapixel images and large scale surveillance projects require greater network bandwidth. JetNet 5010G supports link aggregation technology to maximize the backbone bandwidth to 3 gigabits. Hundreds of megapixel or HDTV video streams can be transmitted via the aggregated link.
  4. Gigabit RJ45/SFP combo ports: Flexible Network Deployment
    The gigabit combo port design gives the flexibility to choose copper or fiber media, 100Base-FX or 1000Base-X, multi-mode or single-mode for surveillance from different distances (meters to kilometers) and without stocking additional switches.
  5. QoS and VLAN: Quality and Secure Video Transmission
    For quality video delivery, JetNet 5010G supports QoS (Quality of Service) and VLAN (Virtual Local Area Network). Video streams can be given precedence to preventing loss during network congestion. Video can be also isolated from data streams for a clean transmission while securing the video from malicious actions.
  6. IP Camera Event Warning
    JetNet 5010G is equipped with several event warning features for remote management of the attached IP cameras - E-mail, SNMP trap, Syslog, and Digital Output. Administrators will be informed once a camera is crashed or shutdown due to an unbearable attack for following repair and maintenance.

With the advanced design, JetNet 5010G is best fit for airport surveillance, highway surveillance, city surveillance, railway station surveillance, infrastructure surveillance, utility surveillance, casino surveillance, oil field surveillance and/or surveillance on ship.

Top | Overview | Specification | Ordering Information | Quick Inquiry

Specifications

Technology
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-TX
IEEE 802.3z Gigabit Ethernet Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p class of service
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE802.3ad LACP
IEEE802.1X Port_based Network Access Control
Performance
Switch Technology
Store and Forward Technology with 32Gbps Switch Fabric.
System Throughput
14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet
Transfer packet size
64 bytes to 1522 bytes (with VLAN Tag)
MAC Address
8K MAC
Packet Buffer
1Mbits
Relay Alarm
Dry Relay output with 1A@24V ability
Management
Configuration
Cisco-Like CLI, JetView, Web, HTTPS, SSH; TFTP/Web Update for firmware and configuration backup/restore, DHCP Client, Warm reboot, Reset to default, Admin password, Port Speed/Duplex control, status, statistic, MAC address table display, Static MAC, Aging time, SNMP v1, v2c, v3, Traps and RMON1.
SNMP MIB
MIB-II, Bridge MIB, VLAN MIB, SNMP MIB, RMON and Private MIB
Port Trunk
Up to 5 Static Trunk and 802.3ad LACP
VLAN
IEEE802.1Q VLAN, GVRP. Up to 64 VLAN groups
Quality of Service
Four priority queues per port, IEEE802.1p COS and Layer 3 TOS/DiffServ
IGMP Snooping
IGMP Snooping V1/V2/V3 for multicast filtering and IGMP Query V1/V2
Rate Control
Ingress filtering for Broadcast, Multicast, Unknown DA or All packets, and Egress filtering for All packets
NTP
Network Time Protocol to synchronize time from Internet
Embedded Watchdog
Embedded hardware watchdog timer to auto reset system when switch system failure
Port Mirroring
Online traffic monitoring on multiple selected ports
Port Security
Assign authorized MAC to specific port
IP Security
IP security to prevent unauthorized access
802.1x
Port_based Network Access Control
DHCP Server
Can assign 255 IP address, support IP and MAC binding
E-mail Warning
Automatic warning by pre-defined events
System Log
Supports both Local mode and Server mode
Network Redundancy
Network Redundancy
Rapid Spanning Tree Protocol: IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy STP and IEEE802.1w.
Rapid Super Ring(RSR):
2nd generation Korenix Ring Redundancy Technology. Failure recovery within 5ms.
Dual Homing II
Multiple uplink paths to upper switches
Multiple Ring
Couple or multiple Rapid Super Rings
Legacy Super Ring
Backward compatible in client mode
Any Ring
Inter-operate with other vendors’ ring
Interface
Configuration
Number of Ports: 10/100TX: 7 x RJ-45, Auto MDI/MDI-X, Auto Negotiation 10/100/1000TX:
3 x RJ-45, combo with SFP Gigabit Fiber/100Base-FX: 3 x SFP with Hot Swappable
Cables:
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100m)
1000 Base-T: 4-pair UTP/STP Cat. 5 cable (100m)
Diagnostic LED
10/100 RJ-45: Link/Activity(Green), Full duplex/Collision (Yellow)
Gigabit Copper/SFP: Link/Activity(Green)
Unit: Power(Green), Digital Out(Red), Digital Input(Green), R.M.(Green)
RS232 Console
RJ-45 Connector, Pin3: TxD, Pin6: RxD, Pin5:GND
Power
2 sets of power Inputs
Digital Input
2 sets of Digital Input
Logic Low (0): 0-10VDC/Logic High(1): 11-30VDC
Alarm
2 sets of Relay outputs for pre-defined events
Reset
Reset button is provided to restore default settings
Power Requirements
Power Supply
12~48V/-12~-48VDC with Reverse Polarity Protection
Power Consumption
11.5 Watts @ DC 48V
Mechanical
Installation
DIN-Rail mount or Wall Mount
Casing
IP-31 protection, aluminum metal case
Dimensions
137mm(H) x 96mm (W) x 119mm (D)
Weight
0.915kg with package
Environmental
Operating Temperature
-20 to 70°C
Operating Humidity
5% to 95% (Non-condensing)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Hi-Pot
1.2KV for ports and power
Regulatory Approvals
EMI
FCC Class A, CE/EN55022. Class A
EMS
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Shock
IEC 60068-2-27
Free Fall
IEC 60068-2-32
Vibration
IEC 60068-2-6
MTBF
249,683 Hours, MIL-HDBK-217F GB standard
Warranty
Global 5 years

Top | Overview | Specification | Ordering Information | Quick Inquiry

Ordering Information

JetNet 5010G IP Surveillance 7+3G Managed Gigabit Ethernet Switch
Includes:

  • JetNet 5010G(without SFP transceiver)
  • Wall mounting plate
  • Quick Installation Guide
  • Documentation CD-ROM

Optional Accessories

  • SFPGSX:1000Base-SX multi-mode SFP transceiver,550m, -10~70°C
  • SFPGSX-w:1000Base-SX multi-mode SFP transceiver,550m, wide operating temperature, -40~85°C
  • SFPGSX2:1000Base-SX plus multi-mode SFP transceiver,2Km, -10~70°C
  • SFPGSX2-w:1000Base-SX plus multi-mode SFP transceiver, 2Km,wide operating temperature, -40~85°C
  • SFPGLX10:1000Base-LX single-mode SFP transceiver 10Km, -10~70°C
  • SFPGLX10-w:1000Base-LX single-mode SFP transceiver, 10Km, wide operating temperature, -40~85°C
  • SFPGLHX30:1000Base-LHX single-mode SFP transceiver,30Km, -10~70°C
  • SFPGLHX30-w:1000Base-LHX single-mode SFP transceiver, 30Km, wide operating temperature, -40~85°C
  • SFPGXD50:1000Base-XD single-mode SFP transceiver, 50Km, -10~70°C
  • SFPGXD50-w:1000Base-XD single-mode SFP transceiver, 50Km, wide operating temperature, -40~85°C
  • SFPGZX70:1000Base-ZX single-mode SFP transceiver, 70Km, -10~70°C
  • SFPGZX70-w:1000Base-ZX single-mode SFP transceiver, 70Km, wide operating temperature, -40~85°C

Top | Overview | Specification | Ordering Information | Quick Inquiry

ISO 9001:2008 Certificate Copyright © 2007~2009 Korenix Technology Co., Ltd. All rights reserved. Subscribe RSS