JetNet 5428G

Central Surveillance 24+4G Managed Ethernet Ring Switch

  • 24-port 10/100-TX and 4-port Gigabit SFP/RJ45 combo ports
  • Up to 4 Gigabits uplink bandwidth for hundreds of megapixel video streams
  • Flexible bandwidth and distance installation by SFP transceivers
  • QoS video precedence transmission
  • Optimized IGMP Query, snooping for one-to-many video transmission
  • VLAN traffic isolation
  • MSR redundant surveillance network
  • Advanced network management features support SNMP, RMON
  • AC power input 90~264V (JetNet 5428G)
  • Redundant 24V/48VDC power inputs (JetNet 5428G-DC)
  • Fan-less 19” 1U Dimension for Secure Rack Mount Installation
  • Operating temperature -25~70°C

Top | Overview | Specification | Ordering Information | Quick Inquiry

Overview

The JetNet 5428G series, the 19-inch 24+4G Managed Ethernet Ring Switch, is equipped with 24 10/100 Base-TX ports plus 4 Gigabit RJ45 / MINI GBIC combo ports. It is a special design for control rooms where high-port density and performance are required. The 4 Gigabit Combo port design allows 10/100/1000 triple speed, and the SFP ports accept all types of Gigabit SFP transceivers, including Gigabit SX, LX, LHX, ZX and XD for several connections and distances. The device is mounted within the 19 inch rack, along with other 19 inch public servers or other network devices. When the lower industrial switches are aggregated to the JetNet 5428G, the 24+4G design allows connecting up to 12 100M rings plus 2 Gigabit rings. Each of the ring has its own ring redundancy protection. This is a unique and Korenix patent protected ring technology. The low power consumption and the fan-less design prolong the product life time.

  1. High Bandwidth and Performance for Large Mount of Video in The Monitor Room
    The JetNet 5428G can perform as an access-level switch in industrial environments ensuring the high bandwidth data transmission. The 4 gigabit combo ports allow users to trunk up to 8G uplink bandwidth and/or to form two independent gigabit rings for great amount of video transmission. Featuring wire speed forwarding capability and Jumbo frame, the gigabit traffic can be transmitted without any packet loss or collision.
  2. MSR Ring Redundancy for Expanded and Reliable Video Traffic Transmission
    JetNet 5428G supports Korenix patented MSR redundant ring with less than 5ms failure recovery time and “zero” ms restoration time to deliver high quality video images in a reliable, scalable surveillance network. Featuring the MultiRing technology, it fits the flexible surveillance network applications allowing direct connection and aggregation of up to 12 100M rings and 2 Gigabit Rings into a single switch.
  3. Full Network Management for Efficient Video Transmission
    To fulfill the advanced management and control requests for IP surveillance in the control rooms, the JetNet 5428G supports various advanced software features, such as VLAN, LACP, GVRP, QoS, IGMP Snooping, SNMP V3, LLDP, etc. to complete the demand and greatly satisfy technicians’ requests. In addition, JetView Pro, specially designed for IP-based mission critical surveillance applications, helps administrators automatically discover devices and efficiently manage the video surveillance network performance in control rooms.
  4. Advanced Security for Secure Video Management
    In the surveillance central room, advanced security features are required and must be implemented. The ACL (Access Contol List) provide “Permit” and “Deny” rules for any or specific host. The IP address, MAC address and port ID are the destinations allowed to be applied the rules. With ACL, the security of the surveillance system can be ensured.

With its high performance, efficiency and security, JetNet 5428G is the best fit for collecting videos in the central room for airport surveillance, highway surveillance, city surveillance, railway station surveillance, infrastructure surveillance, utility surveillance, casino surveillance, oil field surveillance and so on.

Top | Overview | Specification | Ordering Information | Quick Inquiry

Specifications

Technology
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-TX
IEEE 802.3z Gigabit Ethernet Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p class of service
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE802.3ad LACP
IEEE802.1X Port_based Network Access Control
IEEE802.1AB Link Layer Discovery Protocol
Performance
Switch Technology
Store and Forward Technology, 12.8Gbps Switch Fabric
System Throughput
14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet
Transfer packet size
Typical: 64 bytes to 1536 bytes
Jumbo Frame Enabled
Up to 9,216bytes
MAC Address
8K MAC
Packet Buffer
2Mbits
Management
Configuration
Cisco-Like CLI, Web, SSL, SSH, JetView, Backup/ Restore, DHCP Client, Warm reboot, Reset to default, Admin password, Port Speed/Duplex control, status, statistic, MAC address table display, Static MAC, Aging time, Dual Firmware images
Jumbo Frame Enabled
Up to 9,216Kbytes
LLDP
Link Layer Discovery Protocol to advertise system/port identity and capability on the local network
SNMP
SNMP v1, v2c, v3 and Traps.
SNMP MIB
MIB-II, Bridge MIB, VLAN MIB, SNMP MIB, RMON and Private MIB
SNTP
Simple Network Time Protocol to synchronize time
Port Mirroring
Online traffic monitoring
Port Trunk
Static Trunk and 802.3ad LACP , Up to 8 Trunk Group, 2-8 ports per trunk
Rate Control
Ingress and Egress rate limiting
VLAN
IEEE802.1Q VLAN, GVRP. Up to 255 VLANs
Quality of Service
Four priority queues per port, IEEE802.1p COS and Layer 3 TOS/DiffServ
IGMP Snooping
IGMP Snooping V1/V2/V3 for multicast filtering and IGMP Query
802.1x
Port_based Network Access Control
Port Security
Assign authorized MAC to specific port
IP Security
IP security to prevent unauthorized access
Access Control List(ACL)
Permit /Deny Access Control Lists
DHCP Server
Support 255 Dynamic IP pool
DHCP Option 82
Relay DHCP Request to remote server
E-mail Warning
Automatic warning by pre-defined events
Syslog
Message logged with server and client mode
Network Redundancy
Rapid Spanning Tree Protocol
802.1D-2004 RSTP, compatible with Legacy STP
Multiple Super Ring (MSR)
Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRing, MultiRing.
Rapid Dual Homing (RDH)
Multiple uplink paths to one or multiple upper switch
TrunkRing
Integrate port aggregate function in ring path to get higher throughput ring architecture
MultiRing
Couple or Multiple Rapid Super Rings within one switch. Maximum 14 rings at JetNet 5428G
Legacy Super Ring
Backward compatible in client mode
Interface
Number of Fixed Gigabit Ports
10/100Base-TX: 24 x RJ-45, Auto MDI/MDI-X, Auto Negotiation
10/100/1000Base-TX: 2 x RJ-45, combo with SFP
1000Base-X: 2 x SFP with Hot Swappable
Cables:
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100m)
1000 Base-T: 4-pair UTP/STP Cat. 5 cable (100m)
Diagnostic LED
System: Power (Green), Ring Master (Green)
10/100 RJ-45:
Link/Activity: Green = 100M, Yellow = 10M;
Duplex: On = Full, Off = Half
Gigabit Copper/SFP:
Link/Activity: Green = 1000M, Yellow = 10M or 100M;
Duplex: On = Full, Off = Half
Gigabit SFP: Link/Activity (Green/Green Blinking)
RS232 Console
DB9 Type, Pin: (2: TxD, 3: RxD, 5:GND)
Power
1 set of AC input (JetNet 5428G)
2 sets of DC inputs (JetNet 5428G-DC)
Power Requirements
Power
90-264VAC power input (JetNet 5428G)
24VDC, 12~48V power input (JetNet 5428G-DC)
Power Consumption
Maximum 20 Watts
Mechanical
Installation
19-inch, 1U Rack Mount
Dimensions
44mm(H) x 438mm (W) x 170mm (D)
Weight
2.65kg with package
Environmental
Operating Temperature
-25 to 70°C
Operating Humidity
5% to 95% (Non-condensing)
Storage Temperature
-40 to 85 °C
Regulatory Approvals
EMI
FCC Class A, CE/EN55022. Class A
EMS
EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety
cUL (CSA22.2, UL60950-1) (JetNet 5428G)
Shock
IEC 60068-2-29
Free Fall
IEC 60068-2-32
Vibration
IEC 60068-2-6
Warranty
Global 5 years

Top | Overview | Specification | Ordering Information | Quick Inquiry

Ordering Information

JetNet 5428G Central Surveillance 24+4G Rackmount Managed Gigabit Ethernet Ring Switch
Includes:

  • JetNet 5428G (no SFP transceivers)
  • Rack Mount Kit
  • Power Cord
  • Console Cable
  • Quick Installation Guide
  • Document CD

JetNet 5428G-DC Central Surveillance 24+4G Rackmount Managed Gigabit Ethernet Ring Switch with 12-48VDC input
Includes:

  • JetNet 5428G-DC (no SFP transceivers)
  • Rack Mount Kit
  • Console Cable
  • Quick Installation Guide
  • Document CD

Optional Accessories

  • SFPGSX:1000Base-SX multi-mode SFP transceiver,550m, -10~70OCSFPGSX2:1000Base-SX plus multi-mode SFP transceiver,2Km, -10~70°C
  • SFPGLX10:1000Base-LX single-mode SFP transceiver 10Km, -10~70°C
  • SFPGLHX30:1000Base-LHX single-mode SFP transceiver,30Km, -10~70°C
  • SFPGXD50:1000Base-XD single-mode SFP transceiver, 50Km, -10~70°C
  • SFPGZX70:1000Base-ZX single-mode SFP transceiver, 70Km, -10~70°C

Top | Overview | Specification | Ordering Information | Quick Inquiry

ISO 9001:2008 Certificate Copyright © 2007~2009 Korenix Technology Co., Ltd. All rights reserved. Subscribe RSS