JetCard 2215

12~24V Booster PoE Switch Universal PCI Card

Support 32 bit Universal PCI bus
Five Ports 10/100 TX Ethernet Switch with 4 Pover Over Ethernet Injectors
Korenix Patented Built-in DC 24 to 48V Booster for rail, bus, transit transportation
Embedded 4-port IEEE 802.3af PoE, delivering 15.4W per port
IEEE 802.3 10 Base-T and 100 Base-Tx compatible
Full or half duplex at 10/100 Mbps
IEEE 802.3u Auto-Negotiation supported
-20~70℃ operating temperature
Top | Overview | Specification | Ordering Information | Quick Inquiry

Overview

The JetCard 2215 is a flexible and high performance five-port Ethernet PoE switch card in Universal PCI format. The easy-to-install drivers that come with JetCard make it easier for you to set up your complex surveillance system. JetCard 2215 is ideal embedded surveillance networking solution for industrial applications.

12~24VDC Power Module to power system and PoE Function
On board power module to adopt 12~24V DC input and then provides +3.3V and +5V for PCI card system use and boosts to 48V for PoE function.

IEEE 802.3af Power over Ethernet
The JetCard is IEEE802.3af standard compliant and works as a PSE (power sourcing device) to deliver 15.4W per port.

Unmanaged Ethernet Switch Function
The JetCard 2215 uses Marvell 88E6065 chip to provide 5 Ethernet ports. Each Ethernet port in the JetCard offers IEEE 802.3 10 Base-T and 100 Base-Tx compliant Ethernet data transmission with auto MDI/MDI-X and auto-negotiation.

Auto MDI/MDI-X
The JetCard automatically determines whether or not it needs to interchange cable sense between pairs so that an external crossover cable is not required. If the JetCard interoperate with a device that cannot automatically correct for crossover, the JetCard makes the necessary adjustment prior to commencing Auto-Negotiation.

Flow Control
The JetCard supports back- pressure and pause frame-based flow control schemes to ensure zero packet loss under temporary traffic congestion.

Top | Overview | Specification | Ordering Information | Quick Inquiry

Specifications

Technology

Standard:

IEEE802.3 10 Base-T
IEEE802.3u 100 Base-Tx
IEEE802.3x flow control and Back Pressure
IEEE802.3af PoE

Processing:

Store and Forward architecture

Interface

Bus Interface:

32-bit Universal PCI bus

Number of Ports:

5 Ethernet ports (4 ports use RJ45 connectors and support PoE function; 1 port use both RJ45 & JST connectors and is reserved for internal connection) 10 Base-T/ 100 Base-Tx with auto MDI/MDI-X Auto-negotiation

IRQ

assigned by Universal PCI plug and play

OS supported:

Windows NT/2000/2003/XP,
Linux 2.4.x/Linux 2.6.x

PoE Technology

PD classification:

detection, class ID 0~3 follow
IEEE802.3af standard

PIN assignment (RJ45 connector):

V+ (Pin 4,5), V- (Pin 7,8),
Tx (Pin 1,2), Rx (Pin 3,6)

Power Limit Control:

The control mode supports IEEE802.3af standard. The maximum DC power delivery on each each PoE is 15.4W@DC 48V input

Hardware

Communication Controller:

Realtek RTL 8139C+ Marvell 88E6065

Board Connector:

RJ45

PoE Cable Connection:

10 Base-T: 4-pair UTP/STP Cat. 3,4,5 cable (100m)

100 Base-Tx: 4-pair UTP/STP Cat. 5 cable (100m)

Dimension:

107 x 166 mm

Net Weight:

300g

Performance

Transfer performance:

14,880bps for Ethernet and 148,800bps for Fast Ethernet

Transfer packet size:

64 to 1522bytes

MAC address:

1K MAC

Memory Buffer:

512 Kbits

Power Requirements

Power Input:

DC 12~24V (ATX 4P connector) for system
use and PoE function

Power Consumption:

67W including PoE

Environmental

Operating Temperature

-20 to 70°C (-4 to 158°F), 5 ~ 95% RH

Storage Temperature

-40 to 80°C (-40 to 176°F), 5 ~ 95% RH

Regulatory Approvals

Regulation:

CE, FCC Class A (Surge:0.5KV; ESD contact
4KV; Air 8KV)

Warranty

5 years

Top | Overview | Specification | Ordering Information | Quick Inquiry

Ordering Information

JetCard 2215 4 PoE, 1 LAN, 12~24V Booster Switch Universal PCI Card
Includes:

JetCard 2215
Quick installation guide
Documentation and software CD-ROM

Top | Overview | Specification | Ordering Information | Quick Inquiry