IP Surveillance 5-Port Unmanaged Fiber PoE Switch
 |
2007 Computex Taipei Best Choice Award |
- 1-port 10/100 FX Ethernet and 4-port IEEE802.3af PoE
- One fiber link for long distance transmission
- DC48V input, 15.4W output for IP camera
- IP camera loss alarm by relay output
- Redundant power input
- IP31 rugged aluminum case with great heat dispersing
- -40~70oC operating temperature (3705f-w)
Top | Overview | Specification | Ordering Information | 
Quick Inquiry
Overview
The JetNet 3705f equips with 4 PoE ports, with each port delivering power up to 15.4 watts in maximum, and one 10/100Base FX fibler up-link port for long distance transmission. The JetNet 3705f conforms to IEEE 802.3af Power over Ethernet (PoE) standard. The Power Over Ethernet technology can power up PoE enabled powered devices in full capability, e.g. IP surveillance camera, wireless Access Point, VoIP phone set, POS system, security sensors, controllers and card readers.
The JetNet3705f provides standard industrial terminal block for the power and relay alarm contact output to alarm any port break or power failure. For the user’s convenience, it also provides a DC jack for the traditional AC/DC power adapter.
The JetNet3705f PoE ports provide PoE auto detection of the link partner to deliver the exact power to the PD. If the link partner is not a PD or the link cable is short, or the device is broken, it will executes a series of standard procedures to avoid sending out a huge power to damage the linked device.
To successfully deliver reliable power, JetNet 3705f builds in strong protection againest abnormal working conditions including 2KV power surge protection from the power input and over-voltage protection to keep PoE output voltage in between DC 44 ~ 57V, 350mA over-load current and 450 mA short current protection.
The JetNet3705f PoE function is fully in compliant with IEEE 802.3af standard, therefore all PoE protection measures are put into practice in the JetNet3705f series.
Top | Overview | Specification | Ordering Information | Quick Inquiry
Specifications
| Technology |
|
|
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX Fast Ethernet Fiber
IEEE802.3x Flow Control and Back-pressure
IEEE 802.3af Power over Ethernet |
|
|
|
| Store and Forward architecture |
|
| Interface |
|
|
| 4 x 10/100 Base-TX, Auto MDI/MDI-X, 1 x 100 Base-FX |
|
|
|
10Base-T: 4-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm(100m)
100Base-TX: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm(100m) |
|
|
|
SC(Multi Mode): 50/125um or 62.5/125um
SC(Single Mode): 9/125um
Wavelength: 1310nm(Multi mode/ Single mode)
Available distance: 2km(Multi-mode)/ 30km(Single mode)
Min. TX power: -19 dBm(Multi-mode)/ -15 dBm(Single mode)
Max. TX power: -14 dBm(Multi-mode)/ -8 dBm(Single mode)
Sensitivity: -31 dBm(Multi-mode)/ -34 dBm(Single mode) |
|
|
|
Power x 3 (Green), Fault x 1(Red)
PoE x 4(Green)
Link/Activity x 5 (Green on / Green Blinking)@100Mbps, (Yellow on / Yellow Blinking)@10Mbps |
|
|
|
| Dry Relay output for port break and power fault |
|
| Performance |
|
|
14,880 pps for Ethernet
148,800 pps for Fast Ethernet |
|
|
|
| 64 bytes to 1522 bytes (with VLAN tag) |
|
|
|
|
|
|
|
|
|
|
| Power Requirements |
|
|
Input Voltage:
48VDC or -48VDC, dual inputs in terminal block connection
AC /DC Power Adapter 48VDC/ 1.6A (option)
Power input connector:
Two Power inputs via the Terminal Block (12 ~24 AWG power cable)
One DC jack for AC/D power adapter.
Reverse Polarity Protection: Present |
|
|
|
6.5Watts without PD loading
70Watts with PD full loading |
|
|
|
Port 1~4
RJ-45 pin assignment: TX (3,6), RX (1,2), V+ (4,5), V-(7,8) |
|
| PoE Ports Output Voltage: |
|
|
|
|
Switch 1~5: Port 1~5 link down alarm Enable/Disable
Switch 6: Power fault alarm Enable/Disable. |
|
| Mechanical |
|
|
| DIN-rail kit and wall mounting |
|
|
|
| IP-31 protection, Aluminum case, Fanless design |
|
|
|
| 33.8 mm (H) x 164.8 mm(W) x 108 mm (D) |
|
| Environmental |
|
|
|
|
|
| 5% to 95% (Non-condensing) |
|
|
|
|
| Regulatory Approvals |
|
|
| FCC Class A, EN55022 Class A |
|
|
|
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Top | Overview | Specification | Ordering Information | Quick Inquiry
Ordering Information
JetNet 3705f IP Surveillance 5-Port Unmanaged Fiber PoE Switch
includes:
- 4 x 10/100 Base-TX PoE Port, 1 x 10/100 Base FX
- Quick Installation Guide
- Documentation CD-ROM
- DIN-Rail mounting kit
Top | Overview | Specification | Ordering Information | Quick Inquiry
