JetNet 4706

IP Surveillance 6-Port Managed PoE-Plus Switch

JetNet 4706

2008 Computex Outstanding IT Product Award
  • 2-port 10/100 TX Ethernet and 4-port PoE / PoE-plus
  • DC48V input, 15.4W output for IEEE802.3af PoE IP camera
  • DC55V input, up to 25W output for IEEE802.3at PoE-plus PTZ/IR camera
  • 100W total power budget
  • QoS for prioritized video transmission
  • Optimized IGMP Query, snooping for one-to-many video transmission
  • Port-based VLAN for video traffic isolation
  • MSR guarantees network reliability, 5ms failure recovery
  • IP camera keep alive check and auto failure alarm, recovery
  • IP camera loss/failure alarm through DO, e-mail and SNMP trap
  • Redundant power inputs
  • IP31 rugged aluminum case with great heat dispersing
  • -40~60oC wide operating temperature model available (JetNet 4706-w)

Top | Overview | Specification | Ordering Information | Quick Inquiry

Overview

JetNet 4706, the winner of 2008 Computex Outstanding IT Product Award, is the first PoE-plus switch in the world. It is equipped with 4 PoE ports and 2 10/100TX Ethernet uplinks. The design of JetNet 4706 is the most suitable model for IP surveillance where power source is not conveniently located, or wireless surveillance integrated with wireless LAN and WiMax.

JetNet 4706 is specifically designed for the most reliable and quality IP video surveillance. The exclusive features include:

  1. IEEE802.3at PoE-plus 25W High Power Capacity
    JetNet 4706 is compliant to both IEEE 802.3af PoE as well as the pioneer standard of IEEE802.3at PoE Plus design for PoE delivery up to 25W in each of the four PoE ports. This satisfies the high power demanding applications, such as  IP cameras with PTZ control, fans and heaters.

  2. IP Camera Auto-Failure Recovery
    JetNet 4706 helps check the live status of its attached IP cameras. Once any of the cameras fails, JetNet 4706 would immediately warn the IT staff through email, SNMP trap, DO alarm, and reset the PoE port to make the shutdowned camera work again. This auto failure recovery feature enhances the system reliability while reduces the maintenance effort of the IT staffs.
  3. Optimized IGMP Query and Snooping: Quality and Cost-Effective Video Multicasting
    JetNet 4706 features IGMP Query which can only be seen on costly layer 3 routers. JetNet 4706 further optimizes IGMP query and snooping implementation for quality video multicasting. These advanced features do not only manage the multicast videos efficiently, but also eliminate the need of deploying a legacy costly layer 3 router.
  4. MSR (Multiple Super Ring): Guarantees Reliable Video Transmission
    Network reliabiliy is critical for video transmission, especially in a large IP surveillance system. While one single Ethernet link carries a number of video streams, any link failure results in serious damage. Korenix redundant ring technology, MSR, guarantees a reliable video delivery. Any network failure can be recovered within 5ms before causing damage to the video streamings.
  5. PoE Schedule
    Korenix provides an hourly/weekly scheduling mechanism for advanced power control. Each PoE port can be configured as on/off by hourly basis. This feature meets economic power management, security, or customer-specific requirements.
  6. Forced Powering
    JetNet 4706 provides forced powering control to deliver power to non-standard PoE devices. Some PoE products, such as wireless APs, security alarms, card readers, that were circulating the market prior to the ratification of PoE standard 802.3af did not comply with the current standard.  Forced powering helps you integrate all PoE products into your security system.
  7. Redundant Power Input
    JetNet 4706, being a power sourcing equipment, takes the responsibility of reliable power delivery. JetNet 4706 is equipped with dual power inputs for those applications where a reliable power supply is critical. The backup power input will be enabled when the main input fails.

With the reliable and quality design, the JetNet 4706 is your best choice for airport surveillance, railway/subway station surveillance, harbor surveillance, building surveillance, city surveillance, infrastructure surveillance, utility surveillance and so on.

Top | Overview | Specification | Ordering Information | Quick Inquiry

Specifications

Technology
Standard
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-T
IEEE 802.1p Class of Service
IEEE 802.3af Power Over Ethernet(PoE)
IEEE 802.3at High Power PoE
IEEE 802.3 Flow Control and Back-pressure
IEEE 802.1D Spanning Tree
IEEE 802.1w Rapid Spanning Tree
Performance
Switch Technology
Store and Forward Technology with 3.2Gbps wire-speed
non-blocking Switch Fabric
System Throughput
1.785Mpps
MAC Address
2000
Packet Buffer
Embedded 1Mbits shared buffer
Transfer performance
14,880pps for Ethernet and 148,800 for Fast Ethernet and transfer packet size from 64 to 1522Bytes
PoE Technology
End-Span wiring architecture
PD classification detection, class ID 0~3 follow IEEE802.3af standard, and 30W High power deliver procedures for class ID 4.
Pin assignment: V+ (RJ-45 Pin 4,5), V- (RJ-45 Pin 7,8), TX (RJ-45 Pin 1,2), RX (RJ-45 Pin 3,6)
Protection: Provides over-current protection by PD class ID
Management
Management interface
SNMP v1, v2c and v3, Web browser, JetView and CLI Management
Management Security
4 entries for web, telnet, SNMP management security
SNMP Trap
Provides Cold start, Warm start, Port event, Power event, Authentication failure, PoE trap and Korenix private trap for proprietary functions
SNMP MIB
RFC 1213 MIBII, RFC 1493 Bridge MIB, RFC 1757 RMON MIB, RFC 2674 VLAN MIB, RFC 1643 Ethernet like MIB, RFC1215 Trap MIB, RFC 3621 Power Ethernet MIB, Korenix Private MIB
Firmware upgrade
TFTP, Local file and JetView
System Log
1000 system entries for system or remote log server
Event Alarm Relay
1 1A @24V Dry Relay Contact output for port link down, PoE and System power events
Quality of Service
Quality of Service determined by port, Tag and IPv4 Type of Service
Class of Service
IEEE802.1p class of service, with 4 priority queue
DHCP
Supports DHCP Cilent and DHCP Server function with specified IP exclusion and MAC binding function
Timer
Supports Network Time Protocol (NTP) to synchronize time from NTP Server
VLAN
Port based VLAN
IGMP Snooping
Supports IGMP Snooping v1/v2/v3 and IGMP Query v1/v2
Network Redundancy
Supports Rapid Super Ring function for network redundancy with 5ms network recovery time; To inter-operate with other higher level switches, JetNet 4706 provides Dual Homing II technology to conform with RSTP protocol.
JetNet 4706 also comforms with IEEE802.1D 2004 edition for RSTP and STP standand protocoes
PoE Port Control
Supports user configuration for PoE enable, disable, or based on schedule
Power Limit Control
The control mode supports IEEE802.3af Standard, Manual and Ultra mode for 30W Hi-power. The maximum DC power delivery on each PoE port is 12.9W@DC 24V input or 30W @ DC55V input
PoE Scheduling Control:
Each PoE port can be activated and powered scheduling with different rule. It supports weekly schedule on hourly basis
IP Security
IP security to prevent unauthorized access
Port Security
Port security to assign authorized MAC to specifc port
Interface
Number of Ports
4 x 10/100Base-TX with PoE Injector
2 x 10/100Base-TX ports
1 x RS-232 Console
Connectors
10/100TX: RJ-45
Console: RJ-45
Power & Relay Alarm: 6-pin Terminal Block
Cable
10Base-T: 4-pair UTP/STP Cat. 3, 4, 5 cable,
EIA/TIA-568 100-ohm(100m)
100Base-TX: 4-pair UTP/STP Cat.5, Cat.5E/Cat.6 cable,
EIA/TIA-568 100-ohm(100m)
Rest Button
For system reboot and factory default setting
Diagnostic LED
Power LED: Power 1/Power 2 (Green)
Fast Ethernet Port 1~4: Link(Green)/
Activity (Green blinking),
PoE Powering (Yellow on), PoE Detect (Yellow blinking),
PoE Disable (Yellow off), PoE Powering failure (Yellow fast blinking)
Fast Ethernet Port 5,6: Link(Green) /Activity (Green blinking)
Alarm (Red): Port link down or power failure occurred
Power Requirements
System Power
Support positive or negative power system with DC 24~55V power input range and polarity reverse protection
Power Consumption
8 Watts @ 50V (Maximum) without PD loading
Mechanical
Installation
DIN-Rail mount or desktop or wall mount
Case
IP-31 grade aluminum metal case
Dimensions
46.5 mm (H) x 147.8 mm (W) x 136 mm (D) without DIN-rail clip
Weight
0.72 kg with package
0.65 kg without package
Environmental
Operating Temperature
-25°C~60°C
Operating Humidity
5% to 95% (Non-condensing)
Storage Temperature
-40 to 85°C
Storage Humidity
5% to 95% (Non-condensing)
Regulatory Approvals
EMI
FCC Class A; CE/EN55022:2003 Class A;
CE/EN61000-3-2:2001 Harmonic Test;
CE/EN61000-3-3:1995 Flicker test
EMS
EN61000-4-2:1998,ESD,EN61000-4-3:1998, RS,EN61000-4-4:1995, EFT
EN61000-4-5:1995, Surge,EN61000-4-6:1996, CS
Safety
CE/EN60950
Shock
IEC 60068-2-27
Free Fall
IEC 60068-2-32
Vibration
IEC 60068-2-6
MTBF
324,345 Hours, MIL-HDBK-217F GB standard
Warranty
5 years

Top | Overview | Specification | Ordering Information | Quick Inquiry

Ordering Information

JetNet 4706 IP Surveillance 6-port Managed PoE-Plus Ethernet Switch
Includes:

  • JetNet 4706, 4 PoE Injectors plus 2 10/100TX ports
  • Quick Installation Guide
  • RS-232 Serial Cable
  • CD User Manual
  • DIN Rail Mount Kit

Optional Accessories

  • 48VDC Din-Rail Power: DR-75-48
  • 48VDC PoE Splitter: PD1205

Top | Overview | Specification | Ordering Information | Quick Inquiry

ISO 9001:2008 Certificate Copyright © 2007~2009 Korenix Technology Co., Ltd. All rights reserved. Subscribe RSS