JetNet 5710G

IP Surveillance 8+2G Managed 802.3at High Power PoE Switch

2-port Gigabit Ethernet plus 8-port 10/100 TX with PoE-Plus
8 PoE ports support 15.4W IEEE 802.3af and 30W high power IEEE802.3at PoE by LLDP PoE classification
200W total power budget for High-power PTZ cameras
Proprietary Forced Powering for nonstandard PoE with safety control
MSR redundant surveillance network with 4+1G MultiRings
LLDP and optional JetView Pro i2NMS, auto-topology visualization management software for efficient surveillance network
QoS for prioritized video transmission
Optimized IGMP Query, snooping for one-to-many video transmission
Tag VLAN for video traffic isolation
LACP port trunking for bandwidth aggregation
Redundant DC Power Inputs and Alarm Relay Output
IP camera keep alive check and auto failure recovery
IP camera loss/failure alarm by e-mail and SNMP trap
EN50155 compliance (applying)
Operating temperature -40~70°C (802.3af)

Top | Overview | Specification | Ordering Information | Quick Inquiry

Overview

JetNet 5710G is a Gigabit Managed High Power PoE Switch, designed exclusively for highly critical PoE applications such as real time IP video surveillance with high resolution quality and the evolving demands of wireless communications such as Wimax and 802.11 a/b/g/n APs. By software configuration or by LLDP auto detection, the 8 PoE injector ports can deliver 15.4W by IEEE 802.3af or 30W by the latest High Power PoE IEEE 802.3at standard. The total power budget is up to 200W per unit to fulfill local increasing PoE demands. JetNet 5710G is compliant with EN50155/50121-4/50121-3-2 railway standards and has -40~70oC wide operating temperature range to work reliably under vibrating and shock environments in rolling stock applications.

The exclusive features include:

IEEE802.3at PoE-plus 30W High Power Capacity for Driving the IP Surveillance / Wireless PoE market
The JetNet 5710G is equipped with the new PSE solution, compliant with both IEEE 802.3af and IEEE 802.3at high power PoE standards. The 8 PoE ports support the LLDP power negotiation function of IEEE 802.3at PoE plus and can deliver 30 watts power per port and 200W per unit to outdoor PTZ IP cameras with direction control for cross-street monitoring, or WiMAX systems for internet access in train stations, airports or Hot-spots. Moreover, the 8 PoE ports of JetNet 5710G integrate forced powering mode function to drive the legacy Powered devices, which does not comfort to the IEEE 802.3 PoE standard.
Efficient Powering Mechanism- IEEE 802.3at LLDP Power over Ethernet
JetNet 6710G-RJ implements the Link Layer Discovery Protocol (LLDP) into the system for efficient power budget negotiation between PD devices. The LLDP packet provides smart power budget control behavior to fulfill the needs of higher end setups requiring exact high power delivery.
Forced Powering
JetNet 5710G provides forced powering control to deliver power to non-standard PoE devices. Some PoE products, such as wireless APs, security alarms, card readers, that were circulating the market prior to the ratification of PoE standard 802.3af did not comply with the current standard. Forced powering helps you integrate all PoE products into your security system.
Power budget limitation with priority control
JetNet 5710G provides budget and priority control to ensure that the total power consumption will not exceed the power limit installed by user. It also provides budget control function to limit the output power in case if the PD device is not claimed right consumption numbers. This feature allows user to protect high priority PD devices from shut down caused by overloading of the power supply
MSR (Multiple Super Ring): Guarantees Reliable Video Transmission
Network reliabiliy is critical for video transmission, especially in a large IP surveillance system. While one single Ethernet link carries a number of video streams, any link failure results in serious damage. Korenix redundant ring technology, MSR, guarantees a reliable video delivery. Any network failure can be recovered within 5ms before causing damage to the video streamings. With the exclusive MultiRing design, the JetNet 5710G allows aggregating up to 5 Rapid Super Rings, including 4 Fast Ethernet plus 1 Gigabit Ethernet Rings.
Optimized IGMP Query and Snooping: Quality and Cost-Effective Video Multicasting
JetNet 5710G features IGMP Query which can only be seen on costly layer 3 routers. The PoE device further optimizes IGMP query and snooping implementation for quality video multicasting. These advanced features do not only manage the multicast videos efficiently, but also eliminate the need of deploying a legacy costly layer 3 router.
LLDP and JetView Pro: Auto-Discovery and Efficient Management
JetNet 5710G supports LLDP function and perfectly works with the Korenix patented JetView Pro industrial network management software (i2NMS) allowing administrators to automatically discover devices and efficiently manage the industrial network performance in IP-based mission critical environments.

With the reliable and high quality design, the EN 50155 Railway compliant JetNet 5710G is your best choice for IP video surveillance in rolling stocks, railways and subways, airports, cities, infrastructures, and so on.

Top | Overview | Specification | Ordering Information | Quick Inquiry

Specifications

Technology

Standard

IEEE 802.3 10 Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3ab 1000 Base-T
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at LLDP Power over Ethernet plus
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE802.3ad Link Aggregation Protocol (LACP)
IEEE802.1x Port Based Network Access Protocol

Performance

Switch Technology

Store and Forward Technology with 32Gbps Switch Fabric.

System Throughput

14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet

CPU Performance

32 bits ARM-9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based watch-dog timer.

System Memory

8M bytes flash ROM, 64M bytes SDRAM

Transfer packet size

64 bytes to 1632 bytes (includes 1522 bytes VLAN Tag)

MAC Address

8K MAC address table

Packet Buffer

1M bits shared memory for packet buffer

Transfer performance

14,880pps for Ethernet and 148,800 for Fast Ethernet, 1488,100 for Gigabit Ethernet

Relay Alarm

Dry Relay output for port event or PoE event.

System Management

Configuration and monitoring interface

Telnet, local RS-232 console, Web- browser interface, SNMP, Trap and SMTP interface.
Cisco-Like CLI, Telnet, Web, TFTP/Web Update for firmware and configuration backup and restore, DHCP Client, warm start, factory default, Admin password, Port Speed/Duplex Control, status, statistic, MAC address table display, static MAC, Aging time, SNMP v1, v2c, v3, Traps and RMON groups 1,2,3,9.

Telnet & Local Console

Supports command line interface with Cisco like commands and maximum 4 sessions; the telnet interface also supports SSH.

SNMP

v1, v2c, V3 with SNMP trap function, up to 4 trap stations and manual configuration of the trap server IP address

SNMP MIB

MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB

Korenix Utility

Supports JetView and JetView Pro with IEEE 802.1AB Link Layer Discovery Protocol for device finding and link topology discovery

Network Time Protocol

Supports NTP protocol with daylight saving function and localize time sync function

Management IP Security

IP address security to prevent unauthorized access

E-mail Warning

4 receipt E-mail accounts with mail server authentication

System Log

Supports both Local or remote Server with authentication

Network Performance

Port Configuration

Port link Speed, Link mode, current status and enable/disable.

Port Trunk

IEEE 802.3ad port aggregation and static port trunk; trunk member up to 6 ports and maximum 4 trunk groups, including Gigabit Ethernet port.

VLAN

IEEE 802.1Q VLAN with GVRP. 64 VLAN groups, VLAN ID from 1 to 4094.
Supports Trunk, Hybrid and Link access modes

Class of Service

IEEE 802.1p class of service; per port 4 priority queues

Traffic Prioratization

Supports 4 physical queues, weighted fair queuing (WRR) and Strict Priority scheme, which follows 802.1p COS tag and IPv4 ToS/ Diffserv information to prioritize the traffic of your industrial network.

IGMP Snooping

IGMP Snooping v1/v2c /v3 for multicast filtering and IGMP Query mode; also supports unknown multicasting process forwarding policies- drop, flooding and forward to router port

Rate Control

Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or All packets

Port Mirroring

Online traffic monitoring on multiple selected ports

Port Security

Port security to assign authorized MAC to specific port

DHCP

DHCP Client, DHCP Server with IP & MAC Address binding and DHCP Relay (option 82)

IEEE 802.1x

Port based network access control

Power over Ethernet

PoE Standard

IEEE 802.3af Power over Ethernet , IEEE 802.3at Power over Ethernet plus

PoE Architecture

End-span wiring architecture

PoE Operating Mode

IEEE 802.3af /at Auto Mode: Automatically detects power consumption level by Classification ID and controls high power by IEEE 802.3at LLDP protocol (note-1).
Forced Mode: Forced PoE powering with Power limiting protection

PoE forwarding conductor

RJ-45: V+ (1,2), V- (3,6)

PoE Forwarding ability

IEEE 802.3af: 15.4w x8 / 70°C
IEEE 802.3at: 30w x8 / 50°C

Port Based budget control with priority control

System will auto calculate total power and shut down low priority port when drawing current is over the power supply

Network Redundancy

Multiple Super Ring (MSR)

New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRing, MultiRing and backward compatible with legacy Super Ring

Rapid Dual Homing (RDH)

Multiple uplink paths to one or multiple upper switch

Trunk Ring

Integrate port aggregate function in ring path to get higher throughput ring architecture

MultiRing

Couple or multiple up to 16 Rapid Super Rings

Rapid Spanning Tree

IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy Spanning Tree and IEEE 802.1w. The RSTP function can be also deployed on the RSR ring port to deliver more redundancy

Interface

Enclosure Port

10/100 TX port:
8 –port RJ-45 with 4 PSE inject function
10/100/1000 TX port :
2-port RJ-45
Console port :
RJ-45 type RS-232 interface
Power & Alarm Relay port:
6-pin removable terminal block connector and 1embedded alarm relay output

Cables

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568B 100-ohm (100m)
100 Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568B 100-ohm (100m)
1000 Base-TX: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568B 100-ohm (100m)

RS-232 & Alarm Output

RS232: TxD (Pin 1), RxD(Pin 2), Signal Ground (Pin 5)
Alarm Output: located on terminal block

LED Indicators

10/100 RJ-45: Link /Activity(Green)
Gigabit Copper: Link/Activity(Green)
PoE port: IEEE 802.3af 15.4w (Green on: Power forwarding; Blinking: PoE Abnormal ) / IEEE 802.3at 30w (Blue on: Power forwarding; Blinking:PoE Abnormal)
Power: System Power ready (Green on)
Sys: System Ready (Green On)
Alm: Alarm Relay Active (Red On)
R.M.: Ring Master (Green on), Ring Failure occurred (Yellow on)

Power input interface

6-pin removable terminal block

Alarm Output

Dry Alarm Relay output integrated in 6-pin terminal block
Alarm Relay activated once pre-configured event occurred. ( 1A/ DC 30V)

Power Requirements

System Power

Input Voltage: DC 48~57V, redundant input with reverse protection

Power Consumption

12 watts without PD loading

Mechanical

Installation

Wall Mount

Case

Steel Metal case

Dimensions

185 (W) x 145 (H) x 63.8 (D) w/o mounting kit
296.5 (W) x 145 (H) x 63.8 (D) w/mounting kit

Environmental

Operating Temperature

-40°C~70°C: 15.4w PD loading x 8 ports
-40°C~60°C: 30w PD loading x8 ports (TBU )

Operating Humidity

0% ~ 90%, non-condensing

Storage Temperature

-40°C~ 85°C

Hi-Pot

AC 1.5KV, port to chassis, power to chassis without protection component

Regulatory Approvals

EMC

IEC 61000-6-2, IEC 61000-6-4
Compliance with EMC inquires of EN50155 standard – EN50121-4, EN50121-3-2,
EMI:
FCC Class A, CE/ EN55022, CISPR-11
EMS:
CE/EN55024
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-9

Shock

Compliance with IEC 61373 for Railway and Rolling stock

Vibration

Compliance with IEC 61373 for Railway and Rolling stock

Warranty

Global 5 years

Notes-1: IEEE 802.3at Link Layer Discovery Protocol type Power over Ethernet, using the LLDP packet to request High power forwarding with PSE device.
TBU: To be update in the further

Top | Overview | Specification | Ordering Information | Quick Inquiry

Ordering Information

JetNet 5710G IP Surveillance 8 + 2G Managed 802.3at High Power PoE Switch
Includes:

JetNet 5710G
Wall /Panel Mounting kits with screw x 1 set
Quick Installation Guide x1
CD user manual x1

Top | Overview | Specification | Ordering Information | Quick Inquiry