| Technology |
|
|
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3z Gigabit SX/LX
IEE802.3ab Gigabit 1000T
IEEE802.3x Flow Control and Back pressure
IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning tree protocol
IIEEE802.1w Rapid spanning tree protocol
IEEE802.1p Class of service
IEEE802.1Q VLAN Tagging
IEEE 802.1x user authentication
IEEE802.3af Power over Ethernet |
|
| Performance |
|
|
| Store and forward switch architecture. Back-plane up to 8.8Gbps |
|
|
|
| 8K MAC address table with Auto learning function |
|
|
|
|
|
|
|
|
|
|
| Management |
|
|
SNMP management, Telnet management, web management,
RS-232 terminal console for command line interface management |
|
|
|
RFC 1157 SNMP, RFC 1213 MIB II, RFC 1643 Ethernet like,
RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, private MIB, RFC 1628
UPS MIB, RFC3621 Power Ethernet MIB |
|
|
|
Cold start, warm start, link down, link up, authorization fail,
Trap station up to 3. Private trap for power supply device. |
|
|
|
| TFTP and console firmware upgradeable |
|
|
|
| IEEE802.1d spanning tree, IEEE802.1w rapid spanning tree. |
|
|
|
Port based VLAN
IEEE802.1Q Tag VLAN
IEEE802.1v Protocol VLAN (IP, IPX,..)
The static VLAN groups up to 256 and dynamic VLAN groups
up to 2048, the VLAN ID can be assigned from 1 to 4094. |
|
|
|
Per system supports high and low queues. The priority service rule:
first come first service, all High before Low, WRR for High or low weight. |
|
|
|
Support 3 settings: “Disable, Low or High priority”. When set to
“Disable”, the income packet will follow QOS policy; Otherwise,
the packet will follow port priority setting to “High/Low” queue. |
|
|
|
It supports IGMP snooping for multimedia application and
supports 256 groups |
|
|
|
It supports ingress and egress MAC address filter and static
source MAC address lock. |
|
|
|
Global system supports 3 mirroring types: “RX, TX and Both
packet”. The maximum of port mirror entries is up to 25. |
|
|
|
Support IEEE802.3ad with LACP function. Up to 7 trunk groups
and group member up to 4. The trunk port within 24-port
10/100TX and extension module. |
|
|
|
| Per port supports bandwidth control. Per level 100Kbps. |
|
|
|
Support IEEE802.1x User-Authentication and can report to RADIUS server.
- Reject
- Accept
- Authorize
- Disable |
|
|
|
|
|
|
|
|
|
System calibrate, AC power line frequency rejection,
IEEE 802.3af resistor range adjust |
|
| Port configuration control |
|
Port Disable / Enable.
PD detect control (enable/disable), Classification detect
control (enable/disable), DC disconnect detect control |
|
|
|
Null: no PD present
Overload: current support over 475mA @ DC 48V and
over 50 milliseconds
DR fail: PD discovery resistor is not in the limited range |
|
|
|
| System detects status, it will show I –sample, V-sample and R-detect. |
|
|
|
It will show current PD parameters, it include Discover-resistor
detected value, current, voltage, power consumption, classification
current and determined class |
|
|
|
| Supports RFC 2030 Simple Network Time Protocol |
|
|
|
| Supports RFC2821 Simple Mail Transfer protocol (option) |
|
|
|
| System Log record up to 1000 entries. |
|
|
|
Support power supply monitoring function for AC power, DC power, fan status
3 types of power supply can be installed with POE switch and POE-UPWM. |
|
|
|
| Support test function to testing power supply. |
|
| Interface |
|
|
10/100TX: 24 x RJ-45
Gigabit Copper: 2 x RJ-45
2 MINI GBIC for MINI GBIC transceiver |
|
|
|
System Power
10/100TX RJ-45 Port: Link/Active (Green: 1000Mbps/
Yellow: 10/100Mbps),Full-duplex/collision
MINI GBIC/ Copper: Link/Activity, Full duplex/collision, 1000Mbps, 100Mbps |
|
|
|
One RS-232 DB-9 female connector for switch management and 2
RS-232 DB-9 male connectors on rear side for DC power supply
and UPS management. |
|
| Power Requirements |
|
|
Embedded AC power supply: AC 100~240V, 50/60Hz, 200W
Extra power input: DC48V
2 DC Fans with detect function |
|
|
|
| 20W (maximum /without PD) |
|
|
|
End-point insert type and compatible with IEEE802.3af
Per port feeding power: 15.4Watts (maximum) |
|
| Mechanical |
|
|
| 440mm(W) x 280mm(D) x 44mm(H) |
|
| Environmental |
|
|
|
|
|
| 10% ~ 95% (non-condensing) |
|
|
|
|
|
|
|
| Regulatory Approvals |
|
|
|
|
|
|
|