JetBox 9532
5-Port PoE Routing Computer with Serial Interface

- Intel IXP 435 667MHz with networking processor to enhance routing and VPN performance
- Complete Layer3 routing support: OSPF, RIP, DVMRP, ipv6
- Full managed features with QoS, VLAN
- 4-port PoE delivers full 15.4W per port, 60W per unit
- 4-port serial interfaces support serial-to-Ethernet technology for remote control
- DC 12~48V power input (48V for PoE)
- Versatile interfaces of USB, DIO, CF/SD card slot
- Embedded Linux UI-Modulized Webmin, capable of running customized control programs
- Cross-platform applications
- Fan-less and ruggedized industrial design for anti-vibration, anti-shock, and -25~70℃ operation temperature
Top | Overview | Specification | Ordering Information |
Quick Inquiry
Overview
JetBox 9532 is a total solution of IP surveillance & security from power providing and data connection of PoE IP cameras, connection and remote management of access and security control devices through serial prots, network group management through complete layer3 routing protocols and full managed switch functions, wireless communication through a USB dongle, warning though DIO control, and its rugged industrial mechanical design. Hereafter, no more annoying power wiring, device set up and data connection problems will bother IP surveillance & security system integrators. One JetBox 9532 can substitute a lot of single-function devices in a front-end control box to save space, simplify system architecture, and reduce cost of installation and maintenance.
Key features of JetBox 9532:
- 4-port Serial Device Server
JetBox 9532 has 4 serial interfaces to connect to access and security control devices, such as card readers, cameras, speakers. JetBox 9532 also supports serial-to-Ethernet technology to read and remotely control the RS232/422/485 interfaces through Ethernet in flexible ways, such as TCP server, TCP client, and paired TCP modes. JetBox 9532 creates a transparent gateway for the serial communication to Ethernet.
- PoE (Power over Ethernet), Replace Traditional Device Power Wiring
JetBox 9532 follows IEEE802.3af standard and works as a power sourcing equipment to provide 15.4W power per port, and 60W power per unit to PoE enabled devices.
- Layer3 Routing, Effective Group Management of Network Devices
JetBox 9532 inspects incoming packets and makes dynamic routing decisions based on the source and destination addresses inside to achieve a better network group management. With built-in networking processor JetBox 9532 can enhance the routing performance up to 80Mbps.
- OSPF (Open Shortest Path First) Protocols, Automatic Failover of WAN Connection
The OSPF routing protocol is playing an increasingly important role in modern networks. It is a multi-vendor standard and allows automatic failover of WAN connection in case of a primary link failure.
- VPN (Virtual Private Network), Key Remote Control Solution
Since computer networks are no longer closed systems and may consist of intranets, extranets, and Internet sites. The key remote access requirement of an enterprise organization can be provided using VPN to mitigate the risks of malicious intrusion and establish a mechanism of users’ identity. DMVPN (Dynamic Multipoint Virtual Private Network) is an enhancement of VPN and an effective solution for dynamic secure overlay networks.
- Linux computing, Webmin (Linux UI)
JetBox 9532 is not only a layer3 router but also a wonderful Linux computer which can execute customized Linux programs. JetBox 9532 also provides a user-friendly web UI—Webmin for Linux beginners to manipulate the network or device related setting easily.
Top | Overview | Specification | Ordering Information |
Quick Inquiry
Specifications
Hardware Specifications
| System |
|
|
Intel Xscale IXP435 667MHz RISC-based
Fanless |
|
|
|
|
|
|
|
|
|
| 10/100 Based-Tx RJ-45 connector x5 |
|
|
|
10Base-T: 4-pair UTP/STP Cat.3,4,5
EIA/TIA-568 100ohm (100m)
100Base-Tx: 4-pair UTP/STP Cat.5
EIA/TIA-568 100ohm (100m) |
|
|
|
SD card slot x1
CF card slot x1 |
|
|
|
| RS232/422/485 x4 (DB37 connector) with long distance termination switches (internal), default RS232 |
|
|
|
USB 2.0 x3 (Host)
Supporting devices: USB flash, wireless dongle |
|
|
|
| 8 DIO (default 8 DI), DI or DO is defined by customers |
|
|
|
| 3-pin header (RS232 interface) |
|
|
|
LED per port (on the port):
Link/Activity (Green on/Green blinking)
Full Duplex/Collision (Yellow on/ Yellow blinking)
LED per PoE port (LAN1~LAN8):
Powered/none x4(Yellow on/off)
LED per unit:
Power on/off x1 (Green on/off)
Power on/off switch x1
Reset button x1 |
|
|
|
| Generates a time-out system reset, 1 sec. |
|
|
|
DC input 48V (for PoE)
DC 12~48V |
|
|
|
| Single input 1.6A at 48V (Maximum, including PoE) |
|
|
|
|
| Mechanical |
|
|
| Rugged Aluminum Alloy Chassis, IP31 protection |
|
|
|
|
|
|
|
|
|
| 160(H) x 112 (W) x 76 (D) mm |
|
|
|
|
| Environment |
|
|
| -13 ~ 158°F(-25 ~ 70°C), 5 to 95% RH |
|
|
|
| -40 ~ 176°F(-40 ~ 80°C), 5 to 95% RH |
|
|
|
FCC class A, CE, UL*
EN55022 class A
EN55024
EN61000-3-2, 3
EN61000-4-2, 3, 4, 5, 6, 8, 11
IEC 60950
Shock: IEC60068-2-27 (50g peak acceleration)
Vibration:
IEC60068-2-6 (5g/10~150Hz/operating)
MTBF: greater than 200,000 hours @ 25°C
*Pending |
|
|
|
|
Top | Overview | Specification | Ordering Information |
Quick Inquiry
Software Specifications
| Embedded Linux 2.6.20 |
|
|
Standard :
IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-Tx Fast Ethernet
IEEE802.3af Power over Ethernet (PoE)
IEEE802.3x Flow Control and Back-pressure
IEEE802.1p Class of service
IEEE802.1Q VLAN
Processing: Store and Forward architecture
Packet filter: Broadcast packet filtering
*Optional |
|
|
|
Serial Interface
Serial service modes: TCP server, TCP client, Paired TCP
WAN Interface
Ethernet: 10/100 Based-Tx RJ-45 connector x1, auto MDI/MDI-X
LAN Interface
Ethernet: 10/100 Based-Tx RJ-45 connector x4, auto MDI/ MDI-X |
|
|
|
Routing per VLAN: Support port-based VLAN and IEEE802.1Q VLAN
Static routing
Dynamic routing: RIP, RIP-II, OSPF, ISIS*, BGP*, DVMRP
PPP
PPPoE
IP Firewall/ Perimeter Security
IP address and port filtering
NAT/ DMZ
VPN: L2TP, PPTP, SLIP, VLAN, IPsec, OpenVPN, GRE*, NHRP*, DMVPN* |
|
|
|
|
Basic Web UI Module (Webmin): PPP/PPPoE Dial up, Configure file management, DHCP Server, Initial System Boot up, Firewall, Network Configuration, Scheduled Jobs System Logs, System Time, User account manager Webmin configure
Extensible for other proprietary Web UI modules:
Routing, NAT, Switch, DIO, Serial, PoE
Extensible for other standard Web UI (webmin) modules
Linux shell access via TELNET connection or console port
SNMP v1, v2c, v3: MIB and traps
MIB-II, Bridge MIB, Ethernet-like MIB, VLAN MIB
Proprietary SNMP MIB sample code
NTP for time management
VLAN: Supports Port-based VLAN and IEEE802.1Q VLAN Management VLAN adjustment
Quality of Service:Quality of Service: Four priority queues per port, 802.1p COS and IP Layer TOS/DiffServ
Security
HTTPS, SSH, SFTP |
|
|
|
Transfer Rate: 14,880 pps for Ethernet port and 148,800 pps for fast Ethernet port
Transfer Packet Size: 64 bytes to 1522 bytes (with VLAN tag)
MAC address: 1K MAC address table
Memory Buffer: 512 Kbits |
|
|
|
| SD card, CF card, USB, Watchdog timer, UART, Ethernet, DIO |
|
Top | Overview | Specification | Ordering Information |
Quick Inquiry
Ordering Information
JetBox 9532 Intel Xscale IXP 435 667MHz, 48V DC, 128MB DDR2 RAM, 4 Serial
All items include:
- JetBox 9532
- Console cable x1
- Attached 2-pin power terminal block
- Attached 5-pin DIO terminal block x2
- Attached blanket to cover SD card slot
- Quick installation guide
- Documentation and software CD-ROM
Optional Accessories:
- Additional applications on CF card: CF card capacity is 2G
- CF2G-L-J Webmin UI for Linux
- CF2G-LM-J Webmin UI & Modbus gateway for Linux
- Serial cable
- CM37M9×4-60 4-port male DB37 to male DB9 connection cable, 60cm
- CM37M25×4-60 4-port male DB37 to male DB25 connection cable, 60cm
Top | Overview | Specification | Ordering Information |
Quick Inquiry