JetWave 2620
Dual IEEE 802.11a Wireless Outdoor AP

- Dual IEEE 802.11a 5GHz interface with max 54 Mbps data rate for each
- Intel TDMA technology extends coverage to 40km
- Dual Radio card can be aggregated with double bandwidth
- Dual Radio Card Relay remote transmission without lost
- Powered by IEEE 802.3af PoE
- WMM (Wi-Fi Multimedia), Wireless QoS for precedence video transmission
- IP67 weather proof for outdoor wireless installation
- Support Base Station, CPE, Relay, Point to Point, and Point to Multiple Point
- More secure system by WEP, WPA, WPA2, 802.1x, MAC address
- Optional certificated 5.8G N-Type Antenna Package (JWA-5.8G-23dBi)
- Operating temperature -30~70oC
Top | Overview | Specification | Ordering Information |
Quick Inquiry
Overview
JetWave 2620, Dual IEEE 802.11a IP67 Wireless Outdoor AP, is an ideal solution to long-distance wirelss surveillance seeking to extend wireless coverage with more bandwidth requirement. JetWave 2620 extends the wireless coverage to 40km. In addition to CSMA (Carrier Sense Multiple Access), the mostly used wireless transmission technology, JetWave 2620 implements Intel TDMA technology for longer wireless delivery without compromising the bandwidth. With a default 23dbi panel antenna, the wireless extensibility can reach at least 40KM with guaranteed transmission quality. Key features of JetWave 2620 are:
- Dual Interface Doubles Bandwidth JetWave 2620 adopts dual 802.11a modules for users to aggregate radio. The link aggregation technology doubles the throughput of point to point application. Thus, users can benefit from the dual 5G bandwidth for more video streams and transmit megapixel and HDTV videos more efficiently.
- Intel TDMA Enlarges the Coverage and Performance Intel TDMA is digital transmission technology that allows a number of users to access a single radio-frequency (RF) channel by allocating unique time slots to each user. By preventing collision problem, JetWave 2620 can extend video transmission to more than 40km with guaranteed quality.
- IEEE 802.11a While IEEE 802.11b/g is more widely accepted in homes, enterprises, and hotspots, the IEEE 802.11a 5G band is less popular so there is less congestion to cause interference or signal contention. JetWave 2620 adapts IEEE 802.11a for longer distance and higher performance.
- WMM (Wi-Fi Multimedia) designed for quality wireless surveillance, JetWave 2620 supports WMM which allows the wireless communication to give the highest priority to multimedia streaming. Video is given precedence over data packets and is delivered more efficiently even under limited bandwidth.
JetWave 2620 is powered by PoE. Along with JetPoE and JetRock series, Korenix provides the total solution to surveillance where wired infrastructures can not be easily reached, such as highway surveillance, railway surveillance, tunnel surveillance, dam surveillance, mining surveillance, harbor/port surveillance, wind farm surveillance, oil field surveillance and so on.
Top | Overview | Specification | Ordering Information |
Quick Inquiry
Specifications
| Technology |
|
|
| IEEE 802.11a/b/g for Wireless LAN IEEE 802.11i Wireless Security IEEE 802.3u for 10/100Base-TX IEEE 802.3af for Power over Ethernet IEEE802.1D Spanning Tree Protocol |
|
| Performance |
|
|
|
|
|
|
|
|
| 5GHz Band: FCC* : 5.725~5.850 GHz CE** : 5.470~5.600 GHz; 5.650~5.725 GHz 2.4GHz Band: FCC : 2.412~2.462GHz CE : 2.412~2.472GHz (Programmable for different country regulations) |
|
|
|
| 802.11a: OFDM (BPSK, QPSK, 16-QAm, 64QAM) 802.11b/g: DSS (CCK, DQPSK, DBPSK) |
|
| RF Output Power (Max. of Avg.) |
|
| 5GHz Band: 24dBm at Radio for FCC (Band 4) 30dB EIRP for ETSI 301 893 (Band3) 2.4GHz Band: 23dBm (Max. of Avg.) at Radio for FCC 20dB EIRP for CE (ETSI 300 328) (Controllable for different country regulations) |
|
|
|
| 5GHz Band: =-90dBm @6Mbps =-73dBm @54Mbps 2.4GHz Band: =-96dBm @1Mbps =-90dBm @6Mbps =-72dBm @54Mbps |
|
| Default Antenna Characteristics |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Interface |
|
|
| 1 x 10/100Base-T, Auto Negotiation |
|
|
|
| RS-232 (UART) in RJ45 Form Factor For debug purpose P1: TXD0, P2: DSR0, P3: RXD0, P4: TXD1, P5: RXD1, P6: DTR1, P7:Hard Reset, P8:GND |
|
|
|
| Embedded buzzer for power on and Antenna Alignment indication |
|
|
|
| Short P7 and P8 less than 1 sec. to reset system Short P7 and P8 less than 5 sec. to reset to factory default |
|
|
|
| 2/4-pair UTP/STP Cat. 5 cable (100m) |
|
| Management |
|
|
| Web UI (Secure SSL), Command Line Interface (SSH or RS-232 (9600)), Windows-based Utility, SNMPv2, DHCP Client, Configuration backup/restore |
|
|
|
| Wireless and Ethernet Traffic statistics |
|
|
|
| WWeb, Windows management tool, TFTP, firmware backup |
|
|
|
| JetWave 2610/2640: Base Station, CPE, Point to Point, Point to Multiple Point JetWave 2620: Base Station, CPE, Relay, Point to Point, Point to Multiple Point |
|
|
|
|
|
|
| Fast Frames, Burst, Compression modes |
|
|
|
|
|
|
| For long distance transmission |
|
|
|
|
|
|
| To enhance Throughput with dual radio card (2620 only) |
|
|
|
|
|
|
| Isolate Wireless data from clients |
|
|
|
| Easy tool to align antenna performance |
|
|
|
| Self-Wireless Connection test |
|
|
|
| HTTPS, SSH, 802.1x, Radius Server, Access Control by Trusted Wireless station, manually add station, MAC Address Authentication |
|
|
|
| WEP 64/128/152 bits, WPA-PSK (TKIP), WPA2-PSK(AES), Mixed WPA/WPA2 |
|
|
|
| Spanning Tree Protocol with Fast Forwarding |
|
|
|
|
|
|
|
| Power Requirements |
|
|
| Power over Ethernet, IEEE802.3af compliant |
|
|
|
| Input: 100-240VAC, 0.6A 50-60Hz Output: 48V, 0.4A |
|
|
|
| Above 6 Watts @ DC 48V, depend on user volume |
|
| Mechanical |
|
|
| IP-67 & Level 17 Beaufort Scale protection |
|
|
|
| Vent for exclude moisture |
|
| External Antenna connector |
|
|
|
|
| Box: 237 mm (H) x 237 mm (W) x 68 mm (D) Antenna: 320 mm (H) x 320 mm (W) x 18 mm (D) |
|
|
|
| Pole Mount (ADC-12 Aluminum alloy) |
|
|
|
|
| Environmental |
|
|
|
|
|
| 10% to 95% (Non-condensing) |
|
|
|
|
| Regulatory Approvals |
|
|
| FCC part 15 Subpart B&C, CE EN301 893(5G) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Top | Overview | Specification | Ordering Information |
Quick Inquiry
Ordering Information
JetWave 2620-EU IEEE Dual 802.11a Wireless Outdoor AP/Bridge , CE Frequency JetWave 2620-US IEEE Dual 802.11a Wireless Outdoor AP/Bridge , FCC Frequency Includes:
- JetWave 2620 Unit with inteqrated 23 dbi antenna
- Mounting Kit
- PoE Injector & Power cord
- Grounding Wire with Screw
- Water Proof RJ-45 Connector Kit
- Quick Installation Guide
- Document CD
Note: Choose the available Radio Frequency for your country
Optional Accessories JWA-5.8G-23dBi 5.8G/23dbi Directional Panel Antenna Includes:
- Panel Antenna
- Mounting Kit
- 1m RF Cable
- V-shape steel plank
| JWA-5.8G-23dBi |
Directional Panel Second Antenna 23dBi for JetWave 2620 |
| JWA-5.8G-15dBi |
Sector Antenna 15dBi for JetWave 2620 |
| JWA-2.4G-15dBi |
Omni Antenna 15dBi for JetWave 2640 |
| JWA-2.4G-12dBi |
Sector Antenna 12dBi for JetWave 2640 |
| JWA-2.4G-9dBi |
Omni Antenna 9dBi for JetWave 2640 |
| JWA-Arrestor-5803 |
0-6G Arrestor for N-Type Antenna for JetWave Series |
PoE Switch
- JetNet 4706: IP Surveillance 6-Port Managed PoE-Plus Switch
- JetNet 4706f: IP Surveillance 6-Port Managed PoE-Plus Fiber Switch
- JetNet 3706: IP Surveillance 6-Port Web-Managed PoE-Plus Switch
- JetNet 3706f: IP Surveillance 6-port Web-Managed PoE Plus Fiber Switch
- JetNet 3706-RJ: Extreme Surveillance 6-port Unmanaged RJ45/IP67 PoE Switch
- JetNet 3705: IP Surveillance 5-port Unmanaged PoE Switch
- JetNet 3705f: IP Surveillance 5-port Unmanaged PoE Fiber Switch
Note: The maximum users would raise the power consumption. To provide enough power,the PoE-plus Switch is recommended.
Top | Overview | Specification | Ordering Information |
Quick Inquiry